Neutrik’s Dante products

Neutrik is pleased to introduce you to its full DANTE® (Digital Audio Network Through Ethernet) solution with its complete product range:

Neutrik's dante NA2-IO-DLINE, NA2-IO-DPRO & NPS-30W
NA2-IO-DLINE, NA2-IO-DPRO & NPS-30W
  • Connect analog audio equipment to a Dante® Network.
  • Heavy duty adapter for rugged stage conditions.
  • Lockable audio and network connections.
  • Different mounting options: rack, floor box, table mounting, truss.
  • AES67.

NA2-IO-DLINE

NA2-IO-DLINE: Line I/O to Dante® interface

Neutrik’s Dante first ever made device, the NA2-IO-DLINE, is an end-of-network device which allows 2 Line-IN and 2 Line-OUT signals to be integrated into a Dante® network. Simultaneously, NA2-IO-DLINE converts a Dante® stream into analog audio signals. Therefore, it is possible to use this tiny robust box to feed analog audio signals into the Dante® network while at the same time receiving a mix from another Dante® source.

Neutrik's dante NA2-IO-DLINE

NPS-30W

NPS-30W: Power over Ethernet supply

The NPS-30W is Neutrik’s answer to increasing demand for PoE injectors. In other words, it’s a passive Gigabit Power over Ethernet supply with 30W PoE budget and no requirement for power negotiation. Therefore, the NPS-30W is a convenient companion for any PoE application, not just Neutrik’s network products.

Neutrik's dante NPS-30W

NA2-IO-DPRO

NA2-IO-DPRO: mic, line and AES/EBU to Dante interface

Neutrik’s Dante latest device, the NA2-IO-DPRO, is a 2IN, 2OUT breakout box for mic, line and AES/ EBU signals, designed to connect your audio equipment to a Dante® network. It features high quality microphone preamps and 2 Dante® ports for either redundant setup or daisy chaining. Audio parameters are adjusted either by Neutrik’s DPRO controller or some common control software. 

Neutrik's dante NA2-IO-DPRO

Remote Control
The DPRO can be remotely controlled either by Neutrik’s DPRO controller software, or by the control plugin for the Q-SYS platform.

  • DPRO Controller Software gives the user not only remote control options such as level, mute, gain, phantom power, input signal and lo-cut, but moreover the possibility to change the device’s network settings and to update the firmware.
  • Control Plugin for the Q-SYS Platform can be used with the NA2-IO-DPRO thanks to its AES67 mode, allowing the user to perform various controls such as gain, phantom power, lo-cut, mute and mic/line switch. So it’s a convenient solution for system designers which widely adopted the QSC environment!

Accessories

NRP1RU-2A

1 RU 19“ RACK unit for NA2-IO-DLINE / NA2-IO-DPRO / NPS-30W
Suited for rack mounts + 4 D-size holes for extra feedthroughs

Neutrik's dante NRP1RU-2A
Neutrik's dante NA-MB-KIT

NA-MB-KIT

Mounting bracket kit for NA2-IO-DLINE / NA2-IO-DPRO / NPS-30W. Perfect for floor boxes or table mounts.
A stepless angle from -90° to +90° can be set.

NA-TM-KIT

The NA-TM-KIT is a truss yoke kit for the installation of up to 2 devices on a truss. It’s compatible with all Neutrik’s network devices, such as NA2-IO-DLINE, NA2-IO-DPRO in addition of course of the NPS-30W.

Neutrik's dante NA-TM-KIT

Happy to help.

Do you want to contact us? Or maybe you just want to learn more about us? Visit belram.be or contact us via email at info@belram.be or via telephone at +32 (0) 2 672 95 90.