Connectors
Showing 1–20 of 827 results
Neutrik NE8MX-B-1
etherCON CAT5E
Cable connector carrier consists of a black chromium shell, chuck and boot. The boot (same as X-series) is suitable for cable diameters from 3.5 – 8 mm. For non pre-assembled cables only. Cable connector carrier does not include a RJ45 plug. The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust...
Neutrik NE8MX-B
etherCON CAT5E
RJ45 cable connector carrier for pre-assembled RJ45 plugs consists of black chromium shell, bushing and boot. Packed with two cable protection elements for cable diameter either up to 5 mm or 8 mm. Cable connector carrier does not include a RJ45 plug. The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely...
Neutrik NE8MX-TOP
male etherCON® TOP RJ45 carrier
Cable connector carrier with a velour chromium shell, chuck and boot. The boot is suitable for cable diameters from 5 – 8 mm. For non pre-assembled cables only. Cable connector carrier does not include a RJ45 plug. The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust, outdoor protected lockable solution...
Neutrik NE8MX6-B-T
etherCON CAT6A
etherCON CAT6A cable connector self-termination, for insulation diameter ≤ 1.1 mm, black plating
Neutrik NE8MX6-B
etherCON CAT6A
etherCON CAT6A cable connector self-termination, for insulation diameter > 1.1 mm, black plating
Neutrik NE8MX6-T
etherCON CAT6A
etherCON CAT6A cable connector self-termination, for insulation diameter ≤ 1.1 mm, nickel plating
Neutrik NE8MX6
etherCON CAT6A
etherCON CAT6A cable connector self-termination, for insulation diameter > 1.1 mm, nickel plating
Neutrik NO12FDW-A
opticalCON MTP® 12 chassis connector
The rear compatibility of opticalCON MTP® chassis fitting with standard MTP® (ELITE male) breakout cable allows easy adaptation to fiber standard connectors such as LC, SC, ST. The approved dust shutter ensures high mating cycles and minimal maintenance. The housing seal is used for color coding and IP protection.
Neutrik NO2-4FDW-1-A
opticalCON DUO chassis connector
Chassis connector with black chromium plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (for SMPTE cable shield), waterproof acc. to IP 65, front panel mount
Neutrik NO2-4FDW-A
opticalCON DUO chassis connector
Chassis connector with black chromium plating, 4 solder contacts and 1 LC-Duplex feedthrough socket, waterproof acc. to IP65, front panel mount
Neutrik NO24FDW-A
opticalCON MTP® 24 chassis connector
The rear compatibility of opticalCON MTP® 24 chassis fitting with standard MTP® 24 (ELITE male with 20 N springforce) breakout cable allows easy adaptation to fiber standard connectors such as LC, SC, ST. The approved dust shutter ensures high mating cycles and minimal maintenance. The housing seal is used for color coding and IP protection.
Neutrik NO2FW-XP
opticalCON DRAGONFLY Female Chassis Connector
Female chassis connector with ruggedized anticorrosive plating, 4 crimp contacts, 1 XB2 feedthrough socket and 1 shell ground contact for SMPTE cable shield. Waterproof acc. to protection class IP68 in mated condition with sealing kit SCXP-F. The chassis connector acts as a feedthrough allowing simplified installations by connecting a XB2 patch cable on the rear. The...
Neutrik NO2MW-XP
opticalCON DRAGONFLY Male Chassis Connector
Male chassis connector with ruggedized anticorrosive plating, 4 crimp contacts, 1 XB2 feedthrough socket and 1 shell ground contact for SMPTE cable shield. Waterproof acc. to protection class IP68 in mated condition with sealing kit SCXP-M. The chassis connector acts as a feedthrough allowing simplified installations by connecting a XB2 patch cable on the rear....
Neutrik NO4FDW-A
opticalCON QUAD chassis connector
Chassis connector, black chromium plating, waterproof acc. to IP65, front panel mount.
Telegärtner MFP8 Industrial CAT6A RJ45 IP20
• Shielded CAT6A RJ45 connector, heavy duty, IP20 w/ dust cap
Neutrik NE8FBH-LED
etherCON CAT5E for horizontal PCB mount
Fully shielded, horizontal PCB mount RJ45 receptacle with B-Series cutout and latch lock, max. panel thickness 3 mm. The “Lighted etherCON” offers a closed metal housing to avoid EMI or cross talking and two light pipes for standard 3 mm LED to indicate data transmission, status, etc.
Neutrik NE8FBH-S
etherCON CAT5E for horizontal PCB mount
Fully shielded, horizontal PCB mount RJ45 receptacle, B-series cutout with latch lock, max. panel thickness 3 mm. The “Shielded etherCON” offers a closed metal housing to avoid EMI or cross talking.
Neutrik NE8FBH
etherCON CAT5E for horizontal PCB mount
Horizontal PCB mount RJ45 receptacle, B-Series cutout with latch lock, max. panel thickness 3 mm
Neutrik NE8FBV-C5-LED
etherCON CAT5E for vertical PCB mount
Vertical PCB mount RJ45 receptacle, CAT5e, two light pipes for through hole LEDs, B-Series cutout with latch lock, max. panel thickness 3 mm
Neutrik NE8FBV-C5-LED1-S
etherCON CAT5E for vertical PCB mount
Vertical PCB mount RJ45 receptacle, CAT5e, shielded, two light pipes for SMD-LEDs, B-Series cutout with latch lock, max. panel thickness 3 mm
